Search
RequestSensor Development Kit (SDK)
Contact information
I have read and accepted the privacy statement.

Sensor Development Kit (SDK)

Sensor
Dev Kit
  • ETL
  • KGS
  • IECEx
  • ATEX
Sensor Development Kit | (SDK)

Efficient way to test and integrate the ION Science photoionisation detection sensors into any application.

The Sensor Development Kit (SDK) is comprised of two printed circuit boards (PCBs), a sensor PCB and integration PCB with a gas delivery hood.

Overview

  • Overview
  • Key Features

Sensor PCB – The sensor board acts as a sensor breakout board enabling users to inset any MiniPID photoionisation detection sensors and perform basic sensor testing. It can also be connected to the integration board making it really simple to add PID sensors to any application.

Integration PCB – The integration board provides signal processing, data logging and communications with industry standard 4-20 mA and Modbus outputs. It can be configured to switch a relay on at a given VOC concentration. The Integration board is configured with a simple PC application.

  • 4- 20 mA input and output
  • Modbus communication
  • Data logging
  • 12 month warranty
  • Simple sensor calibration
  • MS window compatible configuration software
  • Bayonet locking gas hood
  • Easy sample delivery

Technical Data

  • ETL
  • KGS
  • IECEx
  • ATEX

The technical data at a glance

  • Sensor PCB
  • Dimensions in mm
    50 (W) x 62 (D) x 4 (H)
  • Output
    Analogue 0 to rail voltage
  • Input voltage
    5 VDC ± 0,5 V.
  • Working temperature
    – 20 °C to + 60 °C
  • Humidity resistant
    0 to 99% RH non condensing
  • Warranty period
    12 months
  • Integration PCB
  • Dimensions in mm
    99 (B) x 85 (T) x 20,5 (H)
  • Output
    Modbus RS485
    Relay (250 VAC / 2A 4 – 20 mA outputs
  • Input voltage
    12 to 30 Vdc ± 0.5 V
  • Working temperature
    >98 % up to 100 ppm
    88 % at 1000 ppm
    75 % at 4000 ppm
  • Humidity resistant
    – 20 °C to + 60 °C
  • Warranty period
    12 months
  • Gas Delivery Hood
  • Dimensions in mm
    Total height including PCB 40 mm
  • Pipe connection
    1/16″ OD barb push fit
    1/16″ @ ID / 1/8 @ OD Viton pipe recommended
  • Seal material
    Viton
  • Max gas pressure
    <300 mBar
  • Show all
Gasdetektion Dichtheitsmessung ISM