The ideal low cost handheld leak detector for SF6.

[Translate to Englisch:] SF6 GASCHECK 6000 Low Cost Handlecksucher

The SF6 GASCHECK 6000 - Leak detectors are used effectively in the mobile SF6  leak detection.
Thanks to the  detection limit achievable in practice of 1x10E-6 mbar l/s, the instrument is excellently suited for simple leak detection applications on SF6 switchgear.

The processor-controlled device is easy to operate and reports detected leaks by means of an acoustic signal as well as the integrated LED bargraph display, which allows a rough classification of the measured values. This allows for quick recognition of small, medium or large leaks.

Insensitive to environmental factors
The leak detector compensates for all ambient influences such as temperature changes and air movement in the room. Intelligent control takes care of the application-specific adjustment of the leak detector.

The "Autoshift"- Function
The exclusive "AUTOSHIFT" function makes it possible to detect leaks in rooms with higher contamination of the ambient air by leaking gas.

SF6 GASCHECK 6000 detects the highest gas concentration, automatically switches to the correspondig measuring range, and takes this value as a starting point (background level). In the following, the instrument determines concentrations above the background as seen when a leak is approached. Rising concentrations are indicated by an audible signal and the bar graph display.

In many cases, this coarse leakage measurement provides a quick and inexpensive indication of the leak tightness of a test piece before much more sensitive devices such as the SF6 LEAKCHECK P1:p have to be used.

SF6 GASCHECK 6000 - Features

  • Quick and inexpensive orientational measurement
  • Easy to handle
  • SF6 Detection limit 1 x 10E-6 mbar l/s
  • Automatic range adjustment

Technical Data Overview

Detector High Voltage Ionization
Sensitivity 1 x 10E-6 mbar l/s for SF6
Response time t90 approx. 1 s
Recovery time t10 approx. 2 s
Audio Frequency change proportional to leak rate
Display 8-fold LED bar display
Sniffer pipe 385 mm, flexible sensor conduit
Self-diagnostics no
Operating Temperature -20°C.... 50°C
Power supply Battery 3 x 1,5V C LR14
Certifications CE-Declaration of conformity
Dimensions 230 x 75 x 300 mm incl. transport case
Weight 1.160 g incl. accessories

SF6 GASCHECK 6000 - Appplications

  • Coarse measurements on SF6 switchgear assemblies
  • Use in service departments of manufacturers of SF6 switchgear systems
  • Mobile leak detection on testing equipment such as differential pressure, mass flow measurement devices etc.
  • Leak detection on SF6 insulated switchgear (GIS)
  • etc.

Delivery Scope

1 pc. SF6 GASCHECK 6000 leak detector
1 pc. Carrying case
1 pc. Protective cap for sensor
1 pc. Water vapor filter
1 pc. User manual, multilingual
Delivery time Immediately, ex stock Mettmann
Warranty 12 months
Would you like more information or have any questions about the product?