SF6 AREACHECK P2

SF6 Room Air Monitor

SF6 AREACHECK P2 Raummonitor

The AREACHECK P2 is the reliable and dependable room monitor for the surveillance of indoor areas for enrichment of inadmissible SF6 concentrations. P2 safeguards personnel and the environment and serves to reduce SF6 emissions. The SF6 AREACHECK P2 monitors can be operated as a stand-alone solution, or connected to a custom controller via a network.

All settings are carried out from a PC, or via the network. Mishandling or manipulation, like by turning knobs, is thus safely avoided. Fan monitoring and comprehensive self-diagnostics constantly monitor the correct functioning of P2.

P2 is equipped with our proprietary, world's leading NIC SF6 detector. The device therefore operates without any cross sensitivities to humidity or other gases.

Thanks to minimal air intake volume, P2 does not cause any filter problems at the gas inlet. The flow rate is set in such a way that the NIC measuring chamber receives just as much gas volume as is required for a safe measurement. P2 remains operational even under harsh environmental conditions.

All components subject to wear and tear are integrated in the SmartSensor block, which can be replaced within minutes. It is therefore not necessary to submit the P2 console for maintenance or calibration. Only the SmartSensor is returned for factory refurbishment. This keeps the device 100% available and avoids costly mounting and downtime overheads.

SF6 AREACHECK P2 - Features

  • Equipped with NIC SF6 detector
  • Permanent operational readiness - even under harsh environmental conditions
  • Integrated fan monitoring
  • Comprehensive self-diagnostics
  • Can be operated stand-alone or in networks
  • Maintenance-free thanks to convenient replacement of the SmartSensor  
SF6 AREACHECK P2 - Austausch des SmartSensors

Technical Data Overview

Detector NIC
Measuring range 0.... 2000 ppm SF6
Measuring interval Selectable, standard 30 min
Response time t90 Depending on setting 5... 30 min
Recovery time t10 On next measuring cycle
Alarm Relay 1 x switch-over contact, RS485, audio output, alarm LED, status LED
Display LED
Self-diagnostics Sensor error, fan error, hardware error
Operating temperature -5°C.... 45°C
Storage temperature 20°C.... 60°C
Operating humidity 10... 90% RH, non-condensing
Operating voltage 100-240V 50/60Hz
Dimensions H 300 x W 170 x D 130 mm

SF6 AREACHECK P2 - Applications

  • SF6 indoor air monitoring in substations
  • Monitoring of work and production sites where SF6 is used 
  • WEL - monitoring for SF6
  • etc.

Delivery Scope

1 pc. SF6 AREACHECK P2 Room Monitor with P2 SmartSensor
1 pc. Wall holder
2 pcs. Key
1 pc. User manual in English
1 pc. Calibration certificate
Delivery time 3 - 4 weeks
Warranty 12 months
Would you like more information or have any questions about the product?